Healthcare Compliance Space Planning for Interior Architects
Generate FGI, ADA, and IBC-compliant healthcare layouts with embedded infection control protocols
What You Can Do
You can generate healthcare facility layouts that integrate FGI Functional Guidelines, ADA accessibility requirements, IBC building codes, and facility-specific infection control protocols from the start. The skill translates complex regulatory language into actionable spatial requirements, validates room configurations against overlapping codes, and identifies compliance gaps before costly redesigns occur. This approach accelerates permit review, ensures patient safety is embedded in foundational planning, and reduces value engineering conflicts.
Features
Translates Functional Guidelines for Health Care Facilities into specific spatial, adjacency, and infrastructure requirements for each room type
Ensures clear floor areas, circulation widths, door swings, restroom fixtures, and accessible routes meet current ADA standards with dimensional verification
Applies International Building Code requirements for occupancy loads, egress paths, fire separations, and mechanical system accessibility relevant to healthcare settings
Integrates isolation room specifications, hand-washing station placement, negative/positive pressure requirements, and traffic flow patterns into layouts
Generates distinct spatial configurations for ICU, OR, emergency, general patient care, and specialized units with department-specific regulatory requirements
Flags overlapping code conflicts, dimensional non-conformities, and adjacency violations with specific regulatory citations before design development
Produces compliance matrices and code cross-references suitable for permitting, accreditation review, and Joint Commission surveys
Example Output
Example 1: ICU Patient Room Layout
Room Type: Critical Care Unit (ICU) — 400 sq ft minimum
- Clear Floor Area: 150 sq ft (FGI Table 1.2-1) ✓
- Bed Clearance: 8 ft head, 5 ft foot, 3 ft sides (ADA 2010 Standards 2.2.3) ✓
- Hand-Washing Station: 3 ft from patient bed, 2.5 ft minimum clearance in front ✓
- Negative Pressure: 6-12 air changes/hour with exhaust to outside (IBC 307.2) ✓
- Emergency Egress: Direct corridor access, 42" minimum door width ✓
- Compliance Score: 100% — Ready for permit submission
Example 2: Emergency Department — Triage & Treatment Zone
Triage Area Configuration:
- Occupancy Load: 25 persons (IBC Table 1004.1) ✓
- Separation: 6 ft minimum between patient stations (infection control) ✓
- Circulation Width: 6 ft minimum corridor serving triage (FGI 2.2-1) ✓
- ADA Accessible Triage Station: 36" wide approach, 30" high counter ✓
- Compliance Gaps Identified:
- Proposed hand-washing location 12 ft from triage — reduce to 3 ft maximum
- Egress corridor 5 ft 6 in — requires widening to 6 ft for occupancy load
Example 3: Isolation Room Suite (Negative Pressure)
Room Requirements & Validations:
- 20 air changes/hour with dedicated exhaust (infection control protocol) ✓
- Anteroom configuration: 100 sq ft minimum with full-height partition ✓
- Hand-washing: Automatic faucets in both room and anteroom ✓
- Floor Finish: Non-porous, sealed for terminal cleaning ✓
- Door Swing: 36" clear opening into room with 18" swing radius ✓
- Compliance Ready: All FGI, ADA, and IBC requirements met for COVID/isolation protocols
What's Included
- SKILL.md: Complete instruction file with regulatory reference framework
- FGI Space Planning Template: Room-by-room requirements matrix with dimensional minimums for common healthcare spaces (patient rooms, ORs, treatment areas, staff zones)
- ADA Accessibility Checklist: Dimensional requirements, clear floor areas, door widths, restroom fixtures, and circulation paths
- IBC Code Cross-Reference: Building code requirements specific to healthcare occupancies, egress, fire separation, and mechanical systems
- Infection Control Protocol Framework: Air handling, hand-washing station placement, traffic flow patterns, and isolation room specifications
Who It's For
- Healthcare Architects — Designing new facilities or major renovations requiring rapid compliance validation across multiple regulatory codes
- Interior Architects in Healthcare — Planning departmental layouts and patient care zones with embedded accessibility and infection control standards
- Space Planners — Developing master plans for hospital systems, clinics, or specialized facilities with complex regulatory requirements
- Design Project Managers — Coordinating compliance review early in design phases to reduce permitting delays and value engineering conflicts
- Facilities & Operations Teams — Evaluating existing layouts against current codes or planning renovations with regulatory validation
Best For
- Master planning new healthcare facilities or major department renovations
- Designing specialized units (ICU, OR, emergency, isolation, oncology) with specific regulatory requirements
- Creating patient care zones serving varied acuity levels with different protocols
- Pre-design phase space requirement and adjacency identification
- Compliance gap analysis and regulatory trade-off evaluation before design development
- Permit documentation packages requiring code cross-references and compliance matrices
You might also like
You systematize the complex process of creating evidence-based master plans for parks and recreation facilities. The framework guides you through analyzing existing conditions, programming spaces for community use, coordinating multi-stakeholder requirements, and developing realistic phasing strategies that survive budget cycles and community scrutiny. You produce implementation-ready plans that address accessibility compliance, environmental stewardship, and long-term community benefit across 5-20 year horizons.
by agenmod
You can write production-ready Python scripts to automate complex DaVinci Resolve workflows using the Fusion and Timeline APIs. Claude helps you debug script errors, optimize performance, and build custom automation that saves hours on repetitive video editing and color grading tasks.
by agenmod
This skill helps you validate interior architectural designs against healthcare-specific compliance frameworks including building codes, ADA accessibility standards, FGI Guidelines, infection control protocols, and state licensure requirements. You can identify regulatory conflicts early in the design process, create compliance matrices for design reviews, and document design decisions that satisfy overlapping federal, state, and local requirements—preventing costly revisions and permitting delays.
by oaker-io
You can develop consistent, broadcast-quality color grades across entire projects using proven workflows and Lumetri techniques. Claude guides you through color theory fundamentals, helps you build custom looks, and provides step-by-step workflows for matching grades across multicam footage and complex timelines. Whether you're correcting skin tones, creating cinematic looks, or maintaining color consistency across episodes, this skill transforms your grading process from guesswork to systematic mastery.
by agenmod
You can conduct comprehensive wetland assessments that synthesize hydrology analysis, soil characterization, and vegetation surveys into actionable restoration designs. This skill generates permit-ready documentation including phased restoration plans, native plant community designs, hydrologic feasibility assessments, and success monitoring protocols that balance ecological recovery with regulatory compliance and budget constraints.
by agenmod
You can conduct rigorous sustainability assessments of building designs by mapping design strategies against LEED, BREEAM, Passivhaus, and Living Building Challenge criteria. Claude will quantify environmental benefits (carbon reduction, water savings, energy efficiency), identify compliance risks, and generate defensible recommendations backed by calculation methodologies and precedent analysis—turning design intent into measurable sustainability outcomes with documentation ready for certifying bodies and clients.
by agenmod
Systematically audit existing streetscape conditions and produce comprehensive assessment reports that identify design opportunities and constraints. You can analyze pedestrian experience, accessibility compliance, safety conditions, and activation potential, then translate findings into prioritized recommendations with professional documentation suitable for municipal reports, design competitions, and stakeholder presentations.
by agenmod
You can rapidly evaluate sites for transit-oriented development potential by analyzing connectivity to transit infrastructure, regulatory zoning compliance, market conditions, and design opportunities. The skill generates comprehensive site assessment reports that synthesize accessibility data, constraint identification, and actionable development strategies—reducing redesign cycles and accelerating approval timelines for mixed-use infill and transit-adjacent projects.
by agenmod