Substation Fault Analysis & Relay Coordination Assistant
Analyze substation relay logs and SCADA data to pinpoint faults and optimize protection coordination
What You Can Do
You can reconstruct fault sequences from relay logs and SCADA data, identify protection coordination conflicts, and recommend device setting adjustments to improve substation reliability. The skill synthesizes event timestamps, voltage/current data, relay target codes, and breaker status to accelerate fault investigation from 4-8 hours of manual analysis to actionable insights in minutes, without requiring re-energization or live testing.
Features
chronologically maps relay operations, breaker trips, and SCADA alarms to identify fault progression
correlates voltage sags, current spikes, and relay target codes to pinpoint fault type, location, and initiating event
detects misoperations, sympathetic trips, and timing conflicts between primary and backup protective devices
suggests coordination margins and device adjustments aligned with IEEE/NERC standards
validates new protective relay settings against fault response specifications pre-energization
flags coordination gaps and non-conformances with industry protection standards
compares actual protection performance against design expectations to identify drift or configuration drift
Example Output
Example 1: Misoperation Analysis
Input: Relay logs showing 138 kV feeder trip at 14:22:35, backup relay operation at 14:22:42, and SCADA showing 2.8 kV voltage depression on adjacent bus.
Output:
- Fault sequence: Primary relay failed to clear 3-phase fault at 4.2 km on feeder; backup overcurrent relay (51) operated after 7-second delay
- Root cause: Primary impedance relay (21) setting miscalibration; threshold set 15% above actual fault impedance
- Recommendation: Recalibrate relay 21 threshold to 8.5 Ω (from 9.8 Ω); verify reach doesn't exceed 90% of protected zone
Example 2: Coordination Conflict
Input: SOE log showing two consecutive 69 kV breaker operations within 200 ms; SCADA differential current data for main transformer.
Output:
- Issue: Sympathetic trip — main transformer differential relay (87T) operated 0.18 seconds after upstream line relay (21), both clearing same fault
- Gap: Insufficient coordination margin between devices; 87T operating time exceeds 21 primary + backup margin
- Recommendation: Adjust 87T pickup from 0.32 A to 0.48 A; increase delay to 0.5 sec to maintain 150 ms coordination margin per NERC PRC-023
What's Included
- SKILL.md instruction file with fault analysis methodology:
- SOE Data Template: structured log format for relay events and timestamps
- SCADA Snapshot Analyzer Checklist: voltage, current, frequency data points to capture
- Protection Coordination Verification Worksheet: device pairs, timing margins, and compliance scoring
- Relay Setting Recommendation Framework: IEEE/NERC margin requirements by protection type
Who It's For
- Substation engineers investigating protection misoperations or unexpected relay trips
- Protection engineers commissioning new relays and coordinating multi-device settings
- System operators troubleshooting nuisance trips before escalation to field crews
- Utility compliance engineers verifying coordination against NERC/IEEE standards
- Asset managers analyzing fault history to prioritize relay upgrades
Best For
- Post-fault event analysis and root cause investigation
- Relay coordination verification during commissioning or retrofits
- Protection setting optimization to reduce misoperations and sympathetic trips
- NERC compliance validation and coordination margin documentation
- Troubleshooting unexplained breaker operations using historical SOE and SCADA data
You might also like
You can process complex transmission fault data—voltage sags, current transients, relay operations, and SCADA logs—to extract causal patterns and evaluate protection response effectiveness. Claude accelerates your diagnostic timeline from hours to minutes, surfacing hidden vulnerabilities and cascading failure risks that routine analysis misses. You'll validate protection coordination, assess equipment damage risk, and generate prioritized corrective actions backed by systematic fault sequence analysis.
by diegosouzapw
You can rapidly reconstruct fault sequences, identify relay coordination failures, and diagnose protective system misoperations by organizing complex data streams into structured investigative narratives. The skill guides you through methodical analysis of relay timing, fault current magnitudes, equipment condition logs, and SCADA telemetry to generate root cause reports and actionable mitigation recommendations for substation engineers and stakeholders.
by diegosouzapw
You can rapidly diagnose medium-voltage distribution faults by analyzing protective device coordination sequences, load flow impacts, and field crew reports within Claude. The skill helps you distinguish between transient and permanent faults, identify whether issues stem from equipment failure or external factors, and validate remediation strategies before implementing risky switching operations. This accelerates your analytical phase so field resources can be deployed efficiently and switching decisions are made with confidence.
by diegosouzapw
You can search Wikidata using four complementary methods: keyword search via the Action API for label-based lookups, semantic/hybrid search through the Vector Database for fuzzy concept matching, direct entity retrieval via Special:EntityData for instant JSON data, and SPARQL queries through WDQS for complex graph relationships and reporting. Each method is optimized for different use cases—from quick entity lookups to multi-table data analysis across millions of linked facts.
by diegosouzapw
You can process complex multivariate utility datasets to identify non-linear relationships between weather, seasonality, calendar effects, and electricity demand. The skill generates calibrated probabilistic forecasts with confidence intervals (10th, 50th, 90th percentiles) that support risk-aware dispatch decisions, unit commitment planning, and reserve procurement—while flagging anomalies and structural shifts in consumption behavior for manual investigation.
by diegosouzapw
You can input residential property characteristics and energy audit findings to receive systematically ranked retrofit recommendations prioritized by ROI and payback period. Claude analyzes multiple upgrade pathways, calculates realistic energy savings projections, compares financing options, and generates professional proposals that translate complex efficiency metrics into actionable upgrade sequences tailored to client budgets and goals.
by diegosouzapw
This skill automates the creation of topic files in your .notes/ directory with pre-formatted YAML frontmatter and section templates. You provide a topic name, and Claude generates a properly named file with consistent metadata (description, keywords, timestamps) and ready-to-use section headers. This eliminates manual setup time and ensures all your knowledge management files follow the same organizational structure.
by diegosouzapw
You can systematically analyze competitors across feature parity, positioning strategies, pricing models, and interaction patterns. This skill transforms scattered competitive intelligence into a working matrix that reveals differentiation gaps, underserved segments, and strategic opportunities—helping you prioritize roadmap decisions and justify go-to-market positioning with data.
by diegosouzapw